Stainless Steel 316 Wire Mesh Pad Demisters with Steel Bar Support Grid for Oil and Gas Industries

 

Knitted wire mesh type demisters are designed specially in drilling of oil and water well, petrochemical and process industries. The steel bar and rod grid design offers this mesh demisters a fixed structure requiring less if any maintenance.

We supply with our exported demisters products also with sketch or drawing how to fit in the vessel, Area Calculated and recommended area and complete accessories for assembling. Major markets we supply include USA, Spain, U.A.E., Thailand, Poland, India, Pakistand and other countries.

Technical Details including Types, Wire, Mesh Surface Area, Vessels, Grid Material, Filtration and Applications are introduced with each types of demisters we supply for export below.

Mist and Dust Removing Stainless Steel 316 Demister Pad for Vessel diameter: 2500 I.D
Demister of Crimped Flat Wire Knit Mesh, 0.23 mm minimum Wire Thickness, designed with grid: Used for Separator Skid to remove 99.5% mist & dust of >5µm size, to be passed through manhole of 600 mm nominal diameter.

SS 316 Knitted Wire Mesh Type Demister with Grid

Thickness: 150 mm
Vessel diameter: 2500 I.D
Material of construction: Stainless steel 316
Free C.S area: >95%
Mesh surface area: >350 m2/m3
Wire thickness: >=0.23 mm minimum
Wire thickness: <=0.28 mm

Application: Demister of wire thickness 0.23 mm minimum is designed to remove 99.5% mist & dust of >5µm size
Demister of wire thickness 0.28 maximum is designed to remove 100% mist & dust of >10 ??m size
The Demister Pad is designed and supplied in sections small enough to be passed through manhole of 600 mm nominal diameter.

SS 316 Knitted Wire Mesh Type Demister with Grid for Vessel Diameter 3100 Inside Diameter

Thickness: 150 mm
Vessel diameter: 3100 I.D
Material of construction: stainless steel 316
Free C.S area: >95%
Mesh surface area: >350 m2/m3
Wire thickness: >=0.23 mm minimum; <=0.28 mm

Application:     

The mist eliminator of wire thickness 0.23 mm minimum is designed to remove 99.5% mist & dust of >5µm size;
The mesh eliminator of wire thickness 0.28 maximum is to remove 100% mist & dust of >10µm size
The Pad Type Demisters with grid are designed and supplied in small sections to be passed through manhole of 600 mm nominal diameter.

Standard Fasel Demister Pad of Monofilament Wire with Support Grids

Bulk Density: 144 kg/m3
Contact Area: 280m2/m3
Free Volume : 98.2%
Wire Dia: 0.27mm (+-0.01)
Wire material: Monofilament wire duly knitted and crimped.

Structures: The wire mesh flat pressed is in coiled form in single piece and suitably oversized for tight fit.
The knitted mesh demisters are made with support grids fabricated out of 25x3mm thick flat bars and 5.5 to 6mm rods.
Top & Bottom grids are tied together by Tie Wires.

Demister Pads for Separator Skid to Meet 100% Liquid Drop for Pakistan Market

Mesh Type: Knit mesh
Filter size: 8 micron of gas
Demister thickness; VTA
Vessel size: 36 inch ID
Vessel length:1 50 inch
Design pressure: 1350 psig
Operating pressure: 1275 psig
Design temp: 180 F
Pressure Class 600
Gas Flow Rate 20 MMSCFD
Oil Flow Rate 3000 BPD

Water Flow Rate 500 BPD
Specific Gravity (Gas) 0.6-0.8
Specific Gravity (Oil) 36-65??API
Specific Gravity (Water) 1.0-1.07
Service Sour
CO2 10 %
H2S 1%
Chlorides Up to 70,000 PPM
PH of Water 3.5-7.5
Retention Time (Min) 3 (Three) minute
Liquid Separation 100 %
Max. Oil in water 1000 mg/litre
Corrosion Allowance 1/8"
Required thickness suitable to meet 100% liquid drop
Demister pad can pass through 18"x sch/80 pipe neck/manway( into two or three pc)

Knitted Mesh Type Demister Suitable for O.D.684

Thickness: 100 mm
Diameter: suitable for O.D.684
Material of construction: stainless steel 316
Free C.S area: >95%
Mesh surface area: >350 m2/m3
Wire thickness: >=0.23 mm minimum

We supply round pad or square pad shape mist catchers. The grid makes it fixed to remove enstrained liquid droplets passing through the knitted mesh materials.